This is a set of two improv-style activites that encourage participants to …
This is a set of two improv-style activites that encourage participants to participate in learning about living and nonliving things. Learners will get to know each other through an icebreaker activity and state their ideas and previous experience with living versus nonliving things. This will help prepare them to explore how scientists define and look for life in worlds beyond our own. It also includes specific tips for effectively engaging girls in STEM. This is the icebreaker activity in Explore: Life on Mars? that was developed specifically for use in libraries.
In the first video segment, we present a cartoon model of a …
In the first video segment, we present a cartoon model of a weighted chain, which can be regarded as an approximation for a polymer under tension (e.g. a strand of DNA being stretched out using optical tweezers). The Hamiltonian and partition function for this system are described in the second segment. Finally, in the third segment, we calculate the average energy and elongation of the chain.
This is a set of three, one-page problems about the size and …
This is a set of three, one-page problems about the size and area of solar panels used to generate power. Learners will will use integer arithmetic to tally the number of hydrogen, oxygen and carbon atoms in a molecule and determine the number of methane atoms that can result. Options are presented so that students may learn about how NASA is using signs of methane gas to search for life on other planets, such as Mars, through a NASA press release or about how astrobiologists who are looking for life beyond Earth are using spectroscopy to identify methane plumes on Mars by viewing a NASA eClips video [7 min.]. This activity is part of the Space Math multi-media modules that integrate NASA press releases, NASA archival video, and mathematics problems targeted at specific math standards commonly encountered in middle school.
KiteModeler was developed in an effort to foster hands-on, inquiry-based learning in …
KiteModeler was developed in an effort to foster hands-on, inquiry-based learning in science and math. KiteModeler is a simulator that models the design, trimming, and flight of a kite. The program works in three modes: Design Mode, Trim Mode, or Flight Mode. In the Design Mode (shown below), you pick from five basic types of kite designs. You can then change design variables including the length and width of various sections of the kite. You can also select different materials for each component. When you have a design that you like, you switch to the Trim Mode where you set the length of the bridle string and tail and the location of the knot attaching the bridle to the control line. Based on your inputs, the program computes the center of gravity and pressure, the magnitude of the aerodynamic forces and the weight, and determines the stability of your kite. With a stable kite design, you are ready for Flight Mode. In Flight Mode you set the wind speed and the length of control line. The program then computes the sag of the line caused by the weight of the string and the height and distance that your kite would fly. Using all three modes, you can investigate how a kite flies, and the factors that affect its performance.
In this activity, students survey other people to find out their thoughts …
In this activity, students survey other people to find out their thoughts about life beyond Earth and compare their ideas with visitors to the Cosmic Questions exhibit. Students can also analyze their survey data to see whether there is any variation or patterns in answers from men and women or people of different ages. To do this, students will need to design their own method for tracking demographic data. This activity is part of the "Cosmic Questions Educator's Guide" that was developed to support the Cosmic Questions exhibit. Activities in the guide can be used in conjunction with or independently of the exhibit.
Are all atoms of an element the same? How can you tell …
Are all atoms of an element the same? How can you tell one isotope from another? Use the sim to learn about isotopes and how abundance relates to the average atomic mass of an element.
Students learn about complex networks and how to use graphs to represent …
Students learn about complex networks and how to use graphs to represent them. They also learn that graph theory is a useful part of mathematics for studying complex networks in diverse applications of science and engineering, including neural networks in the brain, biochemical reaction networks in cells, communication networks, such as the internet, and social networks. Students are also introduced to random processes on networks. An illustrative example shows how a random process can be used to represent the spread of an infectious disease, such as the flu, on a social network of students, and demonstrates how scientists and engineers use mathematics and computers to model and simulate random processes on complex networks for the purposes of learning more about our world and creating solutions to improve our health, happiness and safety.
This lesson will introduce students to environmental issues. Students will recognize environmental …
This lesson will introduce students to environmental issues. Students will recognize environmental opinions and perspective, which will help them define themselves and others as either preservationists or conservationists. Students also learn about the importance of teamwork in engineering.
This lesson helps students explore the functions of the kidney and its …
This lesson helps students explore the functions of the kidney and its place in the urinary system. Students learn how engineers design instruments to help people when kidneys are not functioning properly or when environmental conditions change, such as kidney function in space.
Through two lessons and five activities, students explore the structure and function …
Through two lessons and five activities, students explore the structure and function of cell membranes. Specific transport functions, including active and passive transport, are presented. In the legacy cycle tradition, students are motivated with a Grand Challenge question. As they study the ingress and egress of particles through membranes, students learn about quantum dots and biotechnology through the concept of intracellular engineering.
Students are presented with a real-life problem as a challenge to investigate, …
Students are presented with a real-life problem as a challenge to investigate, research and solve. Specifically, they are asked to investigate why salt water helps a sore throat, and how engineers apply this understanding to solve other problems. Students read a medical journal article and listen to an audio talk by Dr. Z. L. Wang to learn more about quantum dots. After students reflect and respond to the challenge question, they conduct the associated activity to perform journaling and brainstorming.
This online, interactive "Chutes and Ladders" type of game is for ages …
This online, interactive "Chutes and Ladders" type of game is for ages 7-9 and can be played with a friend or against the computer. As players land on squares, depending on the described action, they either "leap" frog ahead if they help the environment or butterfly "flutter" back if they do not. The website includes a short explanation of why we should care about frogs and butterflies, as well as some facts about some of the activities on the game board and why they are good or not good for the environment. A printable version of the board game is also available.
The Maryland Science Center is working with formal education providers in local …
The Maryland Science Center is working with formal education providers in local underserved schools around a combined project including an interactive exhibit, a Davis Planetarium program and associated Educator Workshops, and will provide outreach to the informal science education community to explore the subject of Astrobiology. Topics covered in both the exhibit and the Davis Planetarium program will include Earthly extremophiles (organisms that survive in extreme conditions), potential other life in the Solar System, locations on nearby worlds where life may exist, the search for exoplanets, the techniques used to discover them, and the NASA missions engaged in the hunt. With an engaging, interactive approach, the exhibit will detail the challenges, questions and techniques of the search for exoplanets, especially Earth-like worlds. The exhibit will help visitors understand the scale of both the Milky Way galaxy and the Universe, and by doing so comprehend the difficulty in searching for other worlds, especially smaller Earth-like worlds.
Students plant sunflower seeds in plastic cups, and once germinated, expose them …
Students plant sunflower seeds in plastic cups, and once germinated, expose them to varying light or soil moisture conditions. They measure growth of the seedlings every few days using non-standard measurement (inch cubes). After a few weeks, they compare the growth of plants exposed to the different conditions and make bar comparative graphs, which they analyze to draw conclusions about the needs of plants.
This activity is about viewing the planet Mars (and others) through a …
This activity is about viewing the planet Mars (and others) through a telescope. Learners will go outside on a clear evening to view the planets and other celestial bodies for themselves. Using sky charts and other resources, and possibly in partnership with a local astronomical society or club, children and their families view Mars with binoculars and/or telescopes. The children who have participated in the other Explore: Life on Mars? activities may serve as docents at this public, community event, sharing what they have done and learned about what life is, the requirements for life, and the possibility for life on Mars now ‰ÛÓ or in the past! It is recommended that the viewing event be paired with the hands-on experiment within the Searching for Life activity if space and time allow. It also includes specific tips for effectively engaging girls in STEM. This is activity 8 in Explore: Life on Mars? that was developed specifically for use in libraries.
Students create large-scale models of microfluidic devices using a process similar to …
Students create large-scale models of microfluidic devices using a process similar to that of the PDMS and plasma bonding that is used in the creation of lab-on-a-chip devices. They use disposable foam plates, plastic bendable straws and gelatin dessert mix. After the molds have hardened overnight, they use plastic syringes to inject their model devices with colored fluid to test various flow rates. From what they learn, students are able to answer the challenge question presented in lesson 1 of this unit by writing individual explanation statements.
In this short demo/activity, a balloon with baking soda in it is …
In this short demo/activity, a balloon with baking soda in it is stretched over the mouth of a flask or bottle containing vinegar. The balloon is tipped so that the baking soda falls into the vinegar, and the reaction creates carbon dioxide, which inflates the balloon. The activity is part of the children's book, The Air We Breathe.
This activity focuses on the relationship between science of looking for life …
This activity focuses on the relationship between science of looking for life and the tools, on vehicles such as the Mars Rover, that make it possible. Learners will create their own models of a Mars rover. They determine what tools would be necessary to help them better understand Mars (and something about life on Mars/its habitability). Then they work in teams to complete a design challenge where they incorporate these elements into their models, which must successfully complete a task. Teams may also work together to create a large-scale, lobby-sized version that may be put on display in the library to engage their community. The activity also includes specific tips for effectively engaging girls in STEM. This is activity 6 in Explore: Life on Mars? that was developed specifically for use in libraries.
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.