Students determine the coefficient of restitution (or the elasticity) for super balls. …
Students determine the coefficient of restitution (or the elasticity) for super balls. Working in pairs, they drop balls from a meter height and determine how high they bounce. They measure, record and repeat the process to gather data to calculate average bounce heights and coefficients of elasticity. Then they extrapolate to determine the height the ball would bounce if dropped from much higher heights.
Students learn about the nature of thermal energy, temperature and how materials …
Students learn about the nature of thermal energy, temperature and how materials store thermal energy. They discuss the difference between conduction, convection and radiation of thermal energy, and complete activities in which they investigate the difference between temperature, thermal energy and the heat capacity of different materials. Students also learn how some engineering requires an understanding of thermal energy.
In this lesson and its associated activity, students conduct a simple test …
In this lesson and its associated activity, students conduct a simple test to determine how many drops of each of three liquids can be placed on a penny before spilling over. The three liquids are water, rubbing alcohol, and vegetable oil; because of their different surface tensions, more water can be piled on top of a penny than either of the other two liquids. However, this is not the main point of the activity. Instead, students are asked to come up with an explanation for their observations about the different amounts of liquids a penny can hold. In other words, they are asked to make hypotheses that explain their observations, and because middle school students are not likely to have prior knowledge of the property of surface tension, their hypotheses are not likely to include this idea. Then they are asked to come up with ways to test their hypotheses, although they do not need to actually test their hypotheses. The important points for students to realize are that 1) the tests they devise must fit their hypotheses, and 2) the hypotheses they come up with must be testable in order to be useful.
This is a lesson about representative sampling. When given parts of the …
This is a lesson about representative sampling. When given parts of the Hubble Deep Field image, learners will count the number of galaxies in one sample section of the image. Then, they will calculate how many galaxies there are in each whole image and how many objects the Hubble Space Telescope could see in the entire Universe. This is Activity H-6 of Universe at Your Fingertips 2.0: A Collection of Activities and Resources for Teaching Astronomy DVD-ROM, which is available for purchase.
The fact that no one knows the answer to this question is …
The fact that no one knows the answer to this question is what makes it exciting. The story of physics has been one of an ever-expanding understanding of the sheer scale of reality, to the point where physicists are now postulating that there may be far more universes than just our own. Chris Anderson explores the thrilling implications of this idea. A quiz, thought provoking question, and links for further study are provided to create a lesson around the 5-minute video. Educators may use the platform to easily "Flip" or create their own lesson for use with their students of any age or level.
Students relate thermal energy to heat capacity by comparing the heat capacities …
Students relate thermal energy to heat capacity by comparing the heat capacities of different materials and graphing the change in temperature over time for a specific material. Students learn why heat capacity is an important property of thermal energy that engineers use in many applications.
Today we’re going to explain how exchangers...exchange heat. We’ll look at concentric …
Today we’re going to explain how exchangers...exchange heat. We’ll look at concentric tubes, finned tubes, plate heat exchangers, and shell-and-tube heat exchangers. And we’ll look at some equations to help us sort through heat transfer and decide what heat exchangers are best suited for our designs.
Students learn about the underlying engineering principals in the inner workings of …
Students learn about the underlying engineering principals in the inner workings of a simple household object -- the faucet. Students use the basic concepts of simple machines, force and fluid flow to describe the path of water through a simple faucet. Lastly, they translate this knowledge into thinking about how different designs of faucets also use these same concepts.
Students investigate different forms of hybrid engines as well as briefly conclude …
Students investigate different forms of hybrid engines as well as briefly conclude a look at the different forms of potential energy, which concludes the Research and Revise step of the legacy cycle. Students are introduced to basic circuit schematics and apply their understanding of the difference between series and parallel circuits to current research on hybrid cars.
In this kinesthetic activity, the concept of energy budget is strengthened as …
In this kinesthetic activity, the concept of energy budget is strengthened as students conduct three simulations using play money as units of energy, and students serve as parts of a planetary radiation balance model. Students will determine the energy budget of a planet by manipulating gas concentrations, energy inputs and outputs in the system in this lesson that supports the study of climate on Mars, Mercury, Venus and Earth. The lesson supports understanding of the real-world problem of contemporary climate change. The resource includes a teacher's guide and several student worksheets. This is the second of four activities in the lesson, How do Atmospheres affect planetary temperatures?, within Earth Climate Course: What Determines a Planet's Climate? The resource aims to help students to develop an understanding of our environment as a system of human and natural processes that result in changes that occur over various space and time scales.
In this lesson on cosmic rays, students will explain two examples of …
In this lesson on cosmic rays, students will explain two examples of a cosmic ray detector. Includes information about student preconceptions and a demonstration that requires a geiger counter and optional access to a small radioactive source that emits energetic helium nuclei (alpha particles), e.g., the mineral the mineral autunite, which contains uranium. This is activity two of four from The Cosmic Ray Telescope for the Effects of Radiation (CRaTER).
Students measure and analyze forces that act on vehicles pulling heavy objects …
Students measure and analyze forces that act on vehicles pulling heavy objects while moving at a constant speed on a frictional surface. They study how the cars interact with their environments through forces, and discover which parameters in the design of the cars and environments could be altered to improve vehicles' pulling power. This LEGO® MINDSTORMS® based activity is geared towards, but not limited to, physics students.
Students do work by lifting a known mass over a period of …
Students do work by lifting a known mass over a period of time. The mass and measured distance and time is used to calculate force, work, energy and power in metric units. The students' power is then compared to horse power and the power required to light 60-watt light bulbs.
Through four lessons and four hands-on associated activities, this unit provides a …
Through four lessons and four hands-on associated activities, this unit provides a way to teach the overarching concept of energy as it relates to both kinetic and potential energy. Within these topics, students are exposed to gravitational potential, spring potential, the Carnot engine, temperature scales and simple magnets. During the module, students apply these scientific concepts to solve the following engineering challenge: "The rising price of gasoline has many effects on the US economy and the environment. You have been contracted by an engineering firm to help design a physical energy storage system for a new hybrid vehicle for Nissan. How would you go about solving this problem? What information would you consider to be important to know? You will create a small prototype of your design idea and make a sales pitch to Nissan at the end of the unit." This module is built around the Legacy Cycle, a format that incorporates findings from educational research on how people best learn. This module is written for a first-year algebra-based physics class, though it could easily be modified for conceptual physics.
In the first video segment, we present a cartoon model of a …
In the first video segment, we present a cartoon model of a weighted chain, which can be regarded as an approximation for a polymer under tension (e.g. a strand of DNA being stretched out using optical tweezers). The Hamiltonian and partition function for this system are described in the second segment. Finally, in the third segment, we calculate the average energy and elongation of the chain.
Students are introduced to the concept of inertia and its application to …
Students are introduced to the concept of inertia and its application to a world without the force of friction acting on moving objects. When an object is in motion, friction tends to be the force that acts on this object to slow it down and eventually come to a stop. By severely limiting friction through the use of the hover pucks, students learn that the energy of one moving puck is transferred directly to another puck at rest when they collide. Students learn the concept of the conservation of energy via a "collision," and will realize that with friction, energy is converted primarily to heat to slow and stop an object in motion. In the associated activity, "The Puck Stops Here," students will investigate the frictional force of an object when different materials are placed between the object and the ground. This understanding will be used to design a new hockey puck for the National Hockey League.
In this activity, learners explore the size and scale of the universe …
In this activity, learners explore the size and scale of the universe by shrinking cosmic scale in 4 steps, zooming out from the realm of the Earth and Moon to the realm of the galaxies. This informational brochure was designed as a follow-up take-home activity for teen and adult audiences. It can follow informal education activities where participants have experienced related space science programming. This activity allows participants to explore ideas of size and scale in the universe at their own pace.
Dozens of free and low-cost college-level courses with classroom-tested materials and an …
Dozens of free and low-cost college-level courses with classroom-tested materials and an interactive online environment. The $25-per-academic-course version includes all resources, along with free instructor tools, such as LMS integration, a learning dashboard and gradebook, and content sequencing and combining.
You can learn pretty much anything here from languages, to math, physics, computer science, psychology, etc!
Students use a simple set up consisting of a coil of wire …
Students use a simple set up consisting of a coil of wire and a magnet to visualize induced EMF. First, students move a coil of wire near a magnet and observe the voltage that results. They then experiment with moving the wire, magnet, and a second, current carrying coil. Students connect the coil to a circuit and the current from the induced EMF charges a conductor.
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.